Cold Balanced Control Programmable Temperature Test Chamber 2000L Temperature Cycling Chamber
Technical Specifications:
| Control Mode |
Cold Balanced Temperature and
Humidity Control System |
| Operating Temp. & Humid. Range |
+5℃ ～ +35℃; <85%R.H. |
| Internal Dimension |
2 * 1 * 1m (W * H * D) |
| Temp. Range |
-20℃ ~ +100℃(150℃) |
| Humid. range |
20% ～98%R.H. |
| Temp. & Humid. Fluctuation |
±0.5℃; ≤2%R.H. |
| Temp. & Humid. Uniformity |
≤2.0℃; ≤3%R.H. |
| Temp. & Humid. Resolution |
0.01℃; 0.1%R.H. |
| Temp. Heating Up Time |
0℃ ~ +100℃within 30min;
-20℃ ~ +150℃within 45min
|
| Temp. Pull Down Time |
20℃ ~ -40℃within 60min;
20℃ ~ -70℃within 85min
|
| Power Supply |
AC380V, 50/60HZ, Three-phase
(Specified by User)
|
| Exterior Material |
Stainless steel with baking paint |
| Interior material |
SUS304# Stainless steel |
| Insulation material |
Rigid Polyurethane foam |
| Refrigeration System |
Mechanical cascade refrigeration system;
Fin type radiator
|
| Circulation system |
Mechanical convection system |
| Humidification Water Supply |
Automatic water regulating, recoverable supply system, water shortage alarm system |
| Water Quality |
Distilled water only, 20L Water tank capacity |
| Controller |
Touch Screen Controller HL-1000 |
| Safety Devices |
Overheat protector Switch, Compressor overload protector Switch, water shortage protector Switch, Humidifier protector Switch, Fault alarm system
|
| Accessories |
Viewing window, Chamber Illumination,
Cable port ø50mm, Product shelf slides 2 pieces, Universal casters, Touch screen controller HL-1000
|
Note:
1, The performance values are no specimen inside the test area.
2, At 20℃ ambient temperature, relative humidity 65%RH, rated voltage
3, According to IEC60068-3-5:2001 and IEC60068-3-6:2001
4, The above specifications are for reference only.
iTemp Series Products Conform Following Standards:
1, IEC60068-3-5-2002 Environmental testing-Part 3-5 Support documentation and guidance-Confirmation of the performance of temperature chambers.
2, IEC6068-3-6-2002 Environmental testing-Part 3-6 Supporting documentation and guidance – Confirmation of the performance of temperature/humidity chambers.
3, IEC68-2-1 (GB-2423.1-2008) Testing A: Low temperature testing method
4, IEC68-2-2 (GB-2423.2-2008) Testing B: High temperature testing method
5, MIL-STD-202F (GJB360.8-87) High temperature life testing
6, MIL-STD-810D (GBJ150.3) High temperature method
7, MIL-STD810D (GBJ150.4) Low temperature method
8, IEC68-2-3 (GB2423.3-93) Testing Ca: Constant moist heat testing method
9, IEC68-2-30 (GB2423.4-93) Testing Db: Alternate moist heat testing method
10, MIL-STD-810D (GJB150.9-93) Moist heat testing method
Product Tags:
|
|
Cold Balanced Control Programmable Temperature Test Chamber 2000L Cycling Chamber Images
|
